PE Film Wrapping Machine

• Customization: Available
• After-sales Service: Engineer on Site
• Warranty: 12months
• Model NO.: GOJON-WMA
• Applicable Goods: Plywooden Box
• Type: Automatic Wrapping Machine
• Driven Type: Electric
• Application: Beverage, Food, Medical, Chemical, Textile, Machinery
• Automatic Grade: Automatic
• Inclusion Degree: Fully Wrapped Winding Machine
• Structure: Pallet Wrapping Machine
• Film Frame Structure: Mechanical Stretch
• Series: T Series - Pallet Wrapping Machine
• Country: China
• Transport Package: Plywooden
• Specification: customized
• Trademark: GOJON
• Origin: Qingdao
• HS Code: 84418090
• Production Capacity: 100

Product Description

Product Description

1. Auto Key threading Strapping machine:

1-1. Equipment shape (length*width *height): 5100mm*755mm*4700mm; (subject to the final drawing)
1-2. The effective size of the arch (width*height): 2200mm*2700mm;
1-3. Power: 2.5KW
1-4. Applicable strapping straps: PET machine straps (16mm*0.6mm PET strapping straps for fully automatic machines);
1-5. Binding method: # and Parallel;
1-6. Heating method: electric direct heating;
1-7. Tightening method: secondary tightening, fixed length to control the tightening force;
1-8. Threading method: electric;
1-9. Movement mode of movement: electric type, frequency conversion speed regulation, effective movement stroke of movement 600mm; (non-complete machine movement, movement of movement alone, to maximize work efficiency and reduce mechanical failures)
1-10. Control mode: automatic and manual switching between each other at will, equipped with emergency stop safety control buttons;
1-11. Control interface: using button control, with manual, start, pause, emergency stop, pass and other functions;
1-12. Packing speed: 20-22 seconds/piece; (including the completion of the packing action of the whole machine)
1-13. It has its own fault detection function, and through the warning lights installed outside, it can prompt and alarm;
1-14. Top pressure: 2000kg
1-15. Pressure way:Hydraulic
1-16. Top pressure struture:2 pcs of pressing plates, balance pressure.
2. Rotation table
2-1. Diameter: 2000mm (subject to the final drawing)
2-2. Effective width of roller: 1600mm (subject to the final drawing)
2-3. Power: 1.5kw
2-4. Load bearing: 3500kg
2-5. Conveying speed: 0-12m/min
2-6. Track moving speed: 0-10m/min
2-7. Track line height: 600mm

3. Automatic rocker arm wrapping machine
 (1) Technical parameters

1. Wrapping Specifications: MAX (2200mm×1800mm×2400) mm
2. Production capacity: 20-30 pallets/hour
3. Cantilever speed: 0-18rpm
4. Power: 2.5kw
5. Machine weight: 1500kg
6. Air pressure: 0.6-0.8Mpa

(2) Equipment composition
a) Swivel arm parts

1. Consists of swing arm and rocker arm
2. Rectangular tube made of high-quality steel sheet
3. The main frame and the surface of the rotating arm are sprayed
4. The rotation of the arm is connected by a slewing support, which is stable and reliable
5. Arm speed: 0-18rpm, the speed is adjustable by frequency conversion, and the arm can be accurately positioned
6. Arm with electromagnetic brake
7. Power of rotary arm reducer: 1.5kw
8. The lifting and lowering of the membrane frame adopts chain drive, and the chain adopts 08B standard roller chain
9. Lifting speed: 0-56mm/s, the lifting speed is adjustable by frequency conversion
10. Lifting reducer (turbine reducer) Power: 0.55kw
11. The rotating arm is equipped with a travel switch to control the up and down travel of the mold base

b) Membrane holder system

1. Made of high-quality steel
2. Pickling, phosphating and spraying after production
3. Pre-stretching film frame: the stretching ratio is 1:2.5, the film is automatically fed, and the feeding speed is adjustable
4. The film is easy to come out, just pull it, and the film frame will automatically stop running. Film feeding motor 0.37KW
5. The proximity switch controls the film to send out, which is sensitive and reliable.
6. The speed of the film feeding motor is adjustable, and the photoelectric switch is installed on the film frame to automatically detect the height of the goods.

c) Automatic film breaking system

1. Made of high-quality rectangular tubes and steel plates Pickling, phosphating, and plastic spraying after production
2. Using air cylinder to control the film and the film, the transformer and the electric heating wire are used to realize the film breaking.
3. Compressed air: 0.6-0.8Mpa
4. Quality: Oil-free and water-free air.

d) Electronic control system:

1. PLC programmable control, the number of winding layers and times can be adjusted, and the height of the goods can be automatically sensed.
2. The number of winding turns on the top and bottom layers can be set randomly and freely.
3. The rotation of the arm and the lifting of the membrane frame can be adjusted by frequency conversion, which is easy to operate.
4. It is easy to control the packaging effect.
5. Cargo start and stop are controlled by photoelectric switch.

e) Air control system

1. Pneumatic control system adopts solenoid valve, pressure reducing valve control
2. Equipped with oil-water separator

4. Roller conveyor line 2pcs
3-1. Length of conveyor line: 1800mm
3-2. Conveyor line width: 1700mm
3-3. Effective width of drum: 1600mm
3-4.Conveyor line height: 600mm

Product Parameters

 

Main part	Name	Brand
Auto Key threading rotation Packing machine	PLC	Mitsubishi
	Inverter	Delta
	AC Contactor	Schneidr
	Overcurrent protector
	Switch button
	Indicator
	Proximity switch inside the movement	Autonics/Han Rong
	Limit switch	Omron
	Intermediate relay	Schneidr
	breaker	Schneidr
	Machine head drive motor	Shengbang
	pneumatic	AirTAC
Rail Rotation car	Chain line motor	CUHK
	Rotary motor	Deli
	Orbit line motor	Deli
	Inverter	Inovance
Fully auto rocker type wrapping machine	PLC	Inovance
	Inverter	Inovance
	Proximity switch	Inovance
	Photoelectric switch	Panasonic/OMRON
	Film Feeding Motor	China famous brand
	Lifting motor	China famous brand
	Cantilever motor	China famous brand
Roller line	Conveyor line motor	China famous brand
	Inverter	Inovance

FAQ

1.Are you factory or trading company?
We are the factory which have been manufacture for more than 20 years.

2.What is the delivery time?
It is 1-2 months if the goods are out of stock.

3.What is the Payment?
TT(bank transfer), LC at sight, all will be accepted.

4.Is OEM & ODM available?
1). We can do the product according your design
2). We can provide customized solutions according your requirments.

5.Can you provide training for the customer?
Yeah. We can provide training for our customer.

6.What certification do you have?
Our company has passed ISO 9001:2008 and all of the forklift have CE certification.

7.How can I get the best price?
Price is the most concerning problem of every customer,if you want to know the price.We need to know your detailed requirements.