Product Description

Feature
* Lengthways and horizontal sheets do decussation inserting.
* Automatic inserting each kinds clapboard and block
* With a fault detection device, stop if the paper jammed

Product Parameters
Technology parameter
Name |
Unit |
Data |
Horizontal inserting width: A |
mm |
120~900 |
Lengthways sheets length: B |
mm |
210~450 |
Clapboard Height: C |
mm |
70~300 |
Horizontal clapboard distance: D |
mm |
20~400 |
Lengthways clapboard distance:E |
mm |
45-850 |
Lengthways sheets No. |
Pc |
1-6 |
Horizontal clapboard No. |
Pc |
1-21 |
Carton inserting mouth width:F |
mm |
>board thickness |
Carton thickness:G |
mm |
1.5~8mm |
Installation Instructions
Name:
A Folding part
B Folding part ground rail
C Paper feeding section
D host
E Fan
F Vacuum pump
Connect:
A and B
B After the two folding machine ground rails are connected with the horizontal connecting ground rail, place the folding part on the ground rail, and the walking wheel can move smoothly on the ground rail.
A and C
Inside of A
Inside of C,After placing the folding part and the paper feeding part, connect the line rails.
The trachea of the collapsible part is inserted on the air filter inside the collapsible part
C and D
C and D are connected by the short plate as shown in the picture, after the connection, connect the chain to the two sprockets, and then install the guard
D and E
Install the fan on the main unit and wire
D and F
Connect the vacuum pump to the air pipe in the threaded pipe at the rear of the main unit, and wire
Connection of control cabinet
Plugs No. 1, 2, and 3 inside the main unit, and plug No. 4 of the folding part are respectively inserted into the corresponding digital positions on the control cabinet
The power cord is connected to the terminal in the picture
After turning on the power, check whether the lifting direction of the motor is correct, whether the direction of the fan is correct, and whether the direction of the vacuum pump motor is correct.




