Auto Paperboard Partition Assembler for Cardboard

• Customization: Available
• Warranty: 12months
• Certification: ISO9001, TUV, ISO, CE
• Application: Commodity, Gifts & Arts, Food
• Driven Type: Electric
• After-Sales Service Provided: Engineers Available to Service Machinery Overseas
• Type: Carton Packaging Machinery
• Automatic Grade: Automatic
• Transport Package: Container
• Specification: 1350, 1450, 1600
• Trademark: GOJON
• Origin: Qingdao, China
• Production Capacity: 100

Product Description

Product Description

Feature
* Lengthways and horizontal sheets do decussation inserting.
* Automatic inserting each kinds clapboard and block
* With a fault detection device, stop if the paper jammed

Product Parameters

Technology parameter 

Name	Unit	Data
Horizontal inserting width: A	mm	120~900
Lengthways sheets length: B	mm	210~450
Clapboard Height: C	mm	70~300
Horizontal clapboard distance: D	mm	20~400
Lengthways clapboard distance:E	mm	45-850
Lengthways sheets No.	Pc	1-6
Horizontal clapboard No.	Pc	1-21
Carton inserting mouth width:F	mm	>board thickness
Carton thickness:G	mm	1.5~8mm

 

Configuration list

Name	Brand
Servo Motor	Schneidr
PLC	Schneidr
Servo Driver	Schneidr
Inverter	Schneidr
Touch Screen	Schneidr
AC Contactor	Schneidr
Reduction box	APEX
Draught fan	Popula
Vacuum pump	EURVOAC
Proximity switch	SICK
Roller motor	Dedong Electric
Cylinder	AirTAC
Solenoid valve	F-tec
Flow control valve	SNS
Clean air conponent	AirTAC
Oil-water separator	SNS

Installation Instructions

Name:
A Folding part
B Folding part ground rail
C Paper feeding section
D host
E Fan
F Vacuum pump


Connect:
A and B

B After the two folding machine ground rails are connected with the horizontal connecting ground rail, place the folding part on the ground rail, and the walking wheel can move smoothly on the ground rail.

A and C


Inside of A

Inside of C,After placing the folding part and the paper feeding part, connect the line rails.

The trachea of the collapsible part is inserted on the air filter inside the collapsible part

C and D

 
C and D are connected by the short plate as shown in the picture, after the connection, connect the chain to the two sprockets, and then install the guard

D and E


Install the fan on the main unit and wire
D and F

Connect the vacuum pump to the air pipe in the threaded pipe at the rear of the main unit, and wire


Connection of control cabinet

Plugs No. 1, 2, and 3 inside the main unit, and plug No. 4 of the folding part are respectively inserted into the corresponding digital positions on the control cabinet


The power cord is connected to the terminal in the picture
After turning on the power, check whether the lifting direction of the motor is correct, whether the direction of the fan is correct, and whether the direction of the vacuum pump motor is correct.